Royal Enfield Bullet 350 Motorcycle Foot Rest Rubber -Old Type

Royal Enfield Bullet 350 Motorcycle Foot Rest Rubber -Old Type

Motorcycle foot rest rubber, also known as footpeg rubber or footpeg pads, provides grip and comfort for the rider. They’re designed to reduce vibration and prevent slipping while riding. Over time, these rubbers can wear out or become damaged, so replacing them can be crucial for maintaining safe and comfortable riding conditions.

When looking for replacements, consider:

1. Compatibility: Ensure the footrest rubber is compatible with your motorcycle's make and model.
2. Material: Most are made from durable rubber, but some might have additional features like extra grip or cushioning.
3. Installation: Replacing the footrest rubber is usually straightforward, but make sure to check for any specific instructions related to your motorcycle.

Replacing motorcycle footrest rubber is generally a straightforward process. Here’s a step-by-step guide to help you with the replacement:

Tools and Materials Needed:

• New footrest rubber (compatible with your motorcycle)
• Socket wrench or screwdriver (depending on your motorcycle’s fasteners)
• Lubricant (optional, for easier removal and installation)

Steps to Replace Footrest Rubber:

1. Prepare the Motorcycle:

   • Ensure the motorcycle is on a stable surface, preferably on a center stand or paddock stand to keep it upright and steady.

2. Remove the Footrest Assembly:

   • Locate the bolts or screws securing the footrest assembly to the motorcycle. These are usually found on the side of the motorcycle where the footrests are attached.
   • Use a socket wrench or screwdriver to remove the fasteners. Keep them in a safe place as you will need them to reattach the footrest.

3. Detach the Old Rubber:

   • Once the footrest assembly is removed, locate the old footrest rubber. Depending on the design, it might be held in place by clips, screws, or adhesive.
   • Gently pry or pull off the old rubber. If it’s glued or bonded, you might need to use a flathead screwdriver or a similar tool to ease it off.

4. Prepare the New Rubber:

   • If necessary, clean the area where the old rubber was attached to remove any adhesive residue or debris.
   • If your new rubber comes with adhesive or requires lubrication for installation, apply it according to the manufacturer’s instructions.

5. Install the New Rubber:

   • Place the new footrest rubber onto the footpeg. Make sure it aligns correctly with any clips or grooves.
   • If the rubber is held in place by screws or bolts, align the holes and insert the fasteners. Tighten them securely but avoid over-tightening, as this could damage the rubber or footpeg.

6. Reattach the Footrest Assembly:

   • Position the footrest assembly back onto the motorcycle and secure it with the bolts or screws you previously removed.
   • Tighten the fasteners securely to ensure the footrest is firmly in place.

7. Check Your Work:

   • Make sure everything is aligned correctly and that the footrest rubber is properly seated.
   • Test the footrest by gently applying pressure to ensure it’s stable and doesn’t move.

8. Test Ride:

   • Take the motorcycle for a short test ride to ensure the new footrest rubber is functioning correctly and providing the desired comfort and grip.

By following these steps, you should be able to replace the footrest rubber efficiently. If you encounter any difficulties or if the footrest assembly has a more complex design, consult your motorcycle’s service manual or seek assistance from a professional mechanic