Gaiters for Royal Enfield motorcycles are protective covers designed to shield the front fork tubes from dirt, dust, and debris. They help maintain the performance of the suspension by preventing wear and tear on the fork seals. Gaiters are typically made of rubber or durable synthetic materials and can enhance the classic look of the motorcycle
Gaiter set of two with clamps is suitable for following Models of Royal Enfield.
Bullet Campus Produced by Royal Enfield in 1997. | Electra 4S-Kick Start Produced in 2005. | Electra 4S-Electric start produced in 2005 | Electra 5S-Kick Start Produced in 2005. | Electra 5S-Electric start produced in 2005 | Bullet 500 | Lightning-500 | Lightning-535 (20 | Lightning-535 ES | Machismo A350 | Thunderbird KS (CDI and TCI.
Here's a general guide on how to install gaiters on a Royal Enfield motorcycle:
Tools Needed
- Allen wrenches
- Socket set
- Screwdrivers
- Clean cloth
Steps
-
Prepare the Motorcycle:
- Place the motorcycle on a stable stand to keep it upright and secure.
-
Remove the Front Wheel:
- Loosen and remove the axle nut using the appropriate socket.
- Carefully slide the axle out and remove the front wheel.
-
Detach the Front Forks:
- Use an Allen wrench to remove the bolts securing the fork to the triple clamp.
- Carefully slide the fork tubes out.
-
Remove Existing Dust Covers:
- If your motorcycle already has dust covers, remove them by sliding them off the fork tubes.
-
Install the Gaiters:
- Slide the new gaiters onto the fork tubes. Ensure the narrow end is at the top.
- Adjust them to sit properly without twisting.
-
Reattach the Forks:
- Slide the fork tubes back into the triple clamp.
- Secure them with the bolts, ensuring they are tightened evenly.
-
Reinstall the Front Wheel:
- Align the wheel and slide the axle through.
- Tighten the axle nut securely.
-
Check Alignment:
- Ensure the front wheel and forks are properly aligned.
- Double-check all bolts and nuts for tightness.
-
Test:
- Once everything is secure, take a short ride to test the installation.
If you're unsure or uncomfortable with any step, consider having a professional mechanic perform the installation
ITEM CODE-A170121 & 22